#########################################
# first day of cass
##  install Solaris 2.7 on Intel hardware
#########################################  
Solaris 2.7 8/99 installer 1.234
Boot Ver 3.0
Drive #19
1st prompt : F2 to scan system.
	It displays a list of things compatable with Solaris 2.7
	Flloppy, mother board, PS2 mouse, Intel Pro 100/B Fast Ethernet
Press F2 to load dirvers.
	Driver ATA.Baf loads
	Lists:	Disks, zips, CD, network interface
For location of install media, put space next to the CD (Bus Master2)
Press F2 to continue
Select tpe of install 
1)Interactive
2)Custom JumpStart
3)Solaris Webstart
   < Interactive>
Displayst Configuring Devices 	
Choose language type English
Choose USA (ASCII) font type
----->>>>kdmconfig now runs (this is specific for intel).
F2 to detect (xigraphics makes solaris supported vid cards)
	Dev:3Dlabs permedia2 (8Mb)
	size: Screen 17 in (43cm)
	res/cab:  Res 1024x768 - 256 colors 70KHz
	monitor: multifreq 56 Khz
	key:	  generic US-Eng
	pointdev: ps/2 mouse
Put an [x]  on No changes
F2 to continue
F2 to continue
Displays color pallet
select <yes>
Xwindows boots
enter host name of unix 12
press <continue>
networked <yes>
  enter IP = 10.4.1.212
click <continue>
choose name resolution method (nis/nis_+, dns, or none)
	choose <none>
Are you part of a subnet (yes press continue)
	choose <continue>
255.255.0.0 (any 10.4. is on your subnet).
Greographical time zone?
	Choose <pacific>
fix the system time
	looks good to me, click <continue>
The initial option overwrites all 
	ok, click <continue>
do you want to add space for diskless clients?.
	No, click <continue>
languages?
	click <continue>
Type of install?
	Entire Distrobution
disk to install on?
	C0d0 (Boot Disk ) 800Mb --> move this one over.
	C0t1d0
auto-layout solaris partiotins, creating partitions will destry
	ok, click <continue>
shows layout again.
	ok, click <continue>
Choose manual layout
	fs		disk		size
	overlap	c0d0s2	7985MB
choose <customize>     
/		150         <----|  these must be in the first 3 postions with solaris 2.7
swap		150         <----|
overlap	7985       <----|
/var		500
/opt		1000
/usr		5133<----|	Applications go here.
/home		1000<----|	If this dir is present, home dirs in /etc/home are not
				created

Actual spaces are smaller.

Press <continue>

Remote mound of sofware 
	Select <no>
Manual Reboot?
	Select <yes>
Install runs fdisk, newfs, and then loads system with pkgadd commands.
When xstarts, you can read the log that spits on the screen with the dmesg command.
Set the root passwd, and log in.
Now we are ready to get on the internet.